Tie Stalls

    • Item #6115, Tie Stall Partition, 163 lbs – Stock Item
    • Item #6113, Tie Stall Manger, 90 lbs – Stock Item
    • Item #4060, Wall Bracket – Horizontal, 2 lbs – Stock Item

    Tie Stalls

    Standing Tie-Stall Partitions

    The ample 5’ wide by 10′ long standing tie stall provides enough room for your horse to lie down while reducing the amount of hay and bedding waste required of a box stall. Standing tie stalls are not recommended for horses that do not receive daily exercise.

    A tether ring is mounted on the front of the feed manger. To prevent your horse from getting tangled it is recommended that you maintain some tension on the tether rope. Make sure the rope is long enough to allow the horse to lie down.

    Loops are mounted to the rear of the standing tie stall partitions for those horses that may require a rope or chain across the rear of the tie stall.

    For details on the required parts select the green arrow on the right edge of the screen.

      Tie Stalls

      • Item #6115, Tie Stall Partition, 163 lbs – Stock Item
      • Item #6113, Tie Stall Manger, 90 lbs – Stock Item
      • Item #4060, Wall Bracket – Horizontal, 2 lbs – Stock Item

      Tie Stalls

      Tie Stall Parts

      Tie Stall Partitions, Item 6115 The partitions are 10′ long. The front section is 7′ tall and the back section is 52″ tall. Attach the front of the partition to the barn wall with two wall brackets. The rear of the partition comes standard with an adjustable telepost which lags to the floor and ceiling. This bracket can be adjusted for ceiling heights from 8′ to 12′. The raised portion of the panel comes with 16 gauge sheet metal. The bottom of the panel frame includes a channel ready to accept 16 pieces of 2″ x 8″ x 47.5″ lumber. Wood and wood fasteners are not included.

      Feed Manger, Item 6113 The feed mangers come with brackets for mounting at the front to a wall and sleeved brackets on the side sleeve to attach to the side of the tie stall. The manger mounts between the tie stall partitions which will be on 60″ centres. The manger comes with a ring for tying off your horses. 8 cubic foot capacity.

      Wall Brackets, Item 4060 Require two brackets per tie stall partition.